Home Sitemap Login

Ballistic Single Doors

Ballistic Single Doors


The ballistic aluminium door is a purpose-made module, suitable for installation into a prepared openings or curtain walled screens. The door sections combine the versatility of aluminium and the strength of steel to create a functional yet aesthetically pleasing door. The doors are available in both single and double leaf.

The door will primarily fulfil the requirements of a thermally broken wind and weather resistant glazing system, with the additional benefit of blast and bullet resistance.

1Product Advantages

The bullet resistant door system through innovative design and the use of composite materials, allows clients and architects the ability to incorporate glazing into very high risk elevations of buildings. This product performs all the standard functions of modern doors necessary to comply with current building regulations and allows for creative architectural design.

The ballistic resistant door system will give clients the ability to create large areas of natural light within the building including open plan reception areas and offices. The system can be used in areas of high occupancy and escape routes to afford protection to staff and members of the public.

The system is designed to be used for both primary and internal lobby doors depending on the site conditions and can be overclad with timber to accommodate architectural detailing.

 

2Product Construction

The profiles are extruded from aluminium and incorporate multiple chambers for insert sections and cabling.

Outer frames and sash are mitre cut and jointed using specially designed cleats.

Transoms have notched ends to ensure an easily weather-proofed joint can be provided between mullion and transom.

The system is zone drained and provision is made to drain water out of the transom at regular intervals.

The 35mm deep glazing rebate can accommodate glass up to 44mm thick and is gasket glazed.

All brackets for this system are a standard design and can be adapted to suit the existing building fabric and architectural requirements.

3Materials

Aluminium profiles are extruded from aluminium alloy 6060T6, complying with the recommendations of BS EN 12020-2/BS EN 755-Parts 1 to 9

The range of sections can be provided in the following finish:

Powder organic coated to BS 6496 or BS EN 12206-1

Where required, a different colour/finish can be provided internally and externally.

Product Preview

Sample Image

Product Features


Fully framed crimped and bolted sections

Concealed reinforcement

Screwed glazing bead with decorative cover caps

Gasket glazed system

Zone drained

Direct and lug fixed options

To learn more about this product and for detailed information browse through the datasheets below.